Filter
Top Products
Loading Ribbon & Supplies 2-3
Loading a Ribbon Cassette
Use a ribbon to print on thermal transfer supplies.
1. Open the printer. See “Opening & Closing the Printer” for more information.
2. Tip the ribbon cassette back, if necessary, and pull it towards you until it slides out of the
printer.
3. Slide a new ribbon cassette with a loaded ribbon into the printer.
See “Loading a Ribbon” for more information about loading a ribbon into the ribbon cassette.
Note: The ribbon shelf raises and lowers automatically when you are removing and loading a
ribbon cassette.
4. Close the printer. See “Opening & Closing the Printer” for more information.
Loading a Ribbon
1. Remove the ribbon cassette from the printer. See “Loading a Ribbon Cassette” for more
information.
2. Rotate the two latches on side “A” of the cassette until they snap into the unlocked (
)
position.
Note: The latches rotate in opposite directions.
3. Turn the ribbon cassette so side “A” faces downward.
4. Lift side “B” of the cassette (without the latches) off and set it aside.
5. Remove the used ribbon and take-up reel.
Ribbon Shelf