Filter
Top Products
30 AutoView 3050/3100/3200 Switch Installer/User Guide
4. Repeat steps 1-3 for each port requiring a device type to be assigned.
5. Click OK in
the Devices dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the dialog box.
Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port number. The
Names list is always sorted by port order. You can toggle between displaying the name or the EID
number of each IQ module, so even if you move the target device to another port, the name and
configuration will be recognized by the switch.
NOTE: When it is initially connected, a target device will not appear in the Names list until it is powered up. Once
an initial connection has been made, it will appear in the Names list even when powered down.
To access the OSCAR interface Names dialog box:
1. If the OSCAR interface is not open, press
Print Screen. The Main dialog box appears.
2. Click Setu
p - Names to open the Names dialog box shown in Figure 3.14.
Figure 3.14: OSCAR Interface Names Dialog Box
NOTE: If new IQ modules are discovered by the AutoView 3050/3100/3200 switch, the on-screen list will be
automatically updated. The mouse cursor will change into an hourglass during the update. No mouse or
keyboard input will be accepted until the list update is complete.
To assign names to target devices:
1. In the Names dialog box, select a target device name or port number and click Mo
dify to open
the Name Modify dialog box shown in Figure 3.15.