Filter
Top Products
Chapter 5: CPS Appliance Commands 51
Syntax
RESUME
Server Commands
The Server command has several forms, as listed in Table 5.10.
Server CLI command
The Server CLI command:
• Specifies the CLI port, type and access character
• Enables or disables device connection from the CLI port
• Specifies a modem initialization string
• Specifies port history mode operations
Table 5.10: Server Command Summary
Command Description
Server CLI
Specifies the serial CLI port, type and access character; modem initialization
string; port history mode operations and port time-out value. It also enables/
disables device connection from the CLI port.
Server FLASH Updates the unit’s FLASH.
Server Ping Enables/disables response to ping requests.
Server PPP Enables/disables PPP connections to the serial CLI port.
Server RADIUS Specifies RADIUS server parameters.
Server Reboot Reboots the unit.
Server Security
Specifies user authentication method, enables/disables security lock-out and
enables/disables connection methods.
Server Set Changes the CCM appliance network configuration.
Server SNMP Enables/disables UDP port 161 SNMP processing.
Server SNMP Community Defines read, write and trap SNMP community strings.
Server SNMP Manager Defines/deletes SNMP management entities.
Server SNMP Trap Enables/disables SNMP traps.
Server SNMP Trap Destination Defines/deletes destinations for enabled SNMP traps.
Server SSH
Enables/disables SSH session access to the CPS appliance and specifies
the SSH authentication method.