Filter
Top Products
Chapter 5: CPS Appliance Commands 73
Syntax
USER SET <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>] [PREEMPT=1|2|3|4]
Table 5.40: User Set Command Parameters
Parameter Description
<username>Username.
PASSWORD=<pwd>
New 3-16 alphanumeric character password. Passwords are case sensitive. This
parameter is required when changing another user’s password. The password is
displayed on the screen. For security, clear your screen display after issuing
this command.
To delete a password, specify Password =“”.
SSHKEY=<keyfile>
Name of uuencoded public key file on an FTP server. The maximum file size that
may be received is 4K bytes.
FTPIP=<ftpadd> FTP server’s IP address.
KEY=<sshkey>
Uuencoded SSH key. To delete an SSH key (whether it was originally specified with
the SSHKEY and FTPIP parameters or with the KEY parameter), specify Key=“”.
ACCESS=<access>
Command and port access rights or level. You may specify multiple access rights,
separated by commas, or a level. If specifying access rights, you may use one of
three forms:
ACCESS=<access> to specify all access rights.
ACCESS=+<access> to specify only access rights to be added.
ACCESS=–<access> to specify only access rights to be deleted.
Valid values for access rights are:
P<n> Access to the specified port number.
P<x-y> Access to the specified range of ports.
PALL Access to all ports.
USER User configuration access rights.
PCON Port configuration access rights.
SCON Configuration access rights.
SMON Monitor access rights.
BREAK Can issue Port Break command.
Valid values for access levels are:
ADMIN PALL, USER, SMON, PCON and BREAK access rights.
APPLIANCEADMIN PALL, USER, SCON, SMON, PCON and BREAK
access rights.
Default = PALL,SMON
PREEMPT=1|2|3|4|
Preemption level, in the range 1 (lowest) - 4 (highest).
Default = 4 (highest)