Filter
Top Products
16 DSR2035/8035 Switch Installer/User Guide
4. Click the Start Here icon to open the Start Here dialog box.
5. Click the Preferences icon to open the Control Center dialog box.
6. Click the Peripherals icon to open the Peripherals dialog box.
7. Click the Mouse icon to open the Mouse dialog box.
8. Set the Acceleration slider to the middle position.
9. (Optional) Select the desired Mouse buttons option and set the Threshold slider to the
desired
position.
10. Click OK to save your settings and to close the Mouse dialog box.
11. Resynchronize the mouse in the software remote session window for the Avocent management
software you are using.
• If you are using DSView software version 2.x or earlier, click Mouse Align.
• If you are using DSView software version 3.0 or later, click Align Local Cursor.
• If you are using the AVWorks software, click Screen Refresh.
The mouse resynchronizes and should work properly.
To adjust the mouse speed and pointer settings for SUSE LINUX drivers:
1. Click the SUSE icon and select the Control Center menu option. (By default, SUSE uses a
modified version of the KDE graphical user interface.)
2. Click anywhere in the screen area to open the Behavior (first time use default) - Control Center
window where you clicked.
3. If the Index side navigation bar is shown in tree view, click the plus symbol (+) next to
Peripherals to display the submenu items. Otherwise, select
Peripherals.
4. Select the Mouse option to display the Mouse - Control Center dialog box.
5. Click the Advanced tab.
6. Set the Pointer acceleration slider to the leftmost position (1.0x).
7. (Optional) Set the Pointer threshold, Double click interval, Drag start time, Drag start distance
and Mouse wheel scrolls by sliders to the desired positions.
8. If necessary, click Defaults to restore the default settings.
9. Click Apply to save your settings.
10. Click the X button in the upper-right corner to close the Mouse - Control Center dialog box.
11. Resynchronize the mouse in the software remote session window for the Avocent management
software you are using:
• If you are using DSView 2.x or earlier software, click Mouse Align.
• If you are using DSView 3.0 or later software, click Align Local Cursor.
• If you are using the AVWorks software, click Screen Refresh.
The mouse resynchronizes and should work properly.