Barco R9001769 Projector User Manual


 
5-4
Connections
5976069 BARCOREALITY 6400 14032000
SDI
SDO
S-VIDEO
VIDEO
COMPUTER
IEEE 1394
TRIG
MOUSE
MONITOR
RS232 IN RS232 OUT
AUDIO IN AUDIO IN AUDIO IN AUDIO IN
COMM. PORT
RC
CB
A
RGBH/CV
5
6
2
1
43
TV tuner, e.g.
Marco Polo
VCR
Composite
Video
or
or
A, B or C
Computer input/Monitor output
Connect the output of the graphical card of the computer to the Computer input of the projector (connection < 60 cm) or insert an interface
between the output of the computer and the input of the projector.
Connect the monitor of the computer to the monitor output of the projector.
This monitor output is only available when the computer input is used as input.
SDI
SDO
S-VIDEO
VIDEO
COMPUTER
IEEE 1394
TRIG
MOUSE
MONITOR
RS232 IN RS232 OUT
AUDIO IN AUDIO IN AUDIO IN
AUDIO IN
COMM. PORT
RC
CB
A
R
GBH/CV
5
6
2
1
43
Pin configuration of the D15 connector :
1 RED
2 GREEN
3 BLUE
4 loop through to monitor
5 ground
6 ground
7 ground
8 ground
Slot 2 selection :
Key in 2 on the RCU or the local keypad.
Video Input
Input signal :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC or cinch 1.0Vpp ± 3 dB
No loop through.
Slot 3 Selection :
Key in 3 on the RCU or the local keypad.
9 loop through to monitor
10 ground
11 loop through to monitor
12 loop through to monitor
13 horizontal/composite sync
14 vertical sync
15 loop through to monitor