Filter
Top Products
6-3
Controlling
5976069 BARCOREALITY 6400 14032000
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system.
Use the + button
Use the - button.
Sharpness Control.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use the control disc to adjust the phase.
Freez key
Press Freez to freeze the displayed image.
Sound controls with direct access.
When a sound control is pressed, a text box with a bar scale, icon and function name of the control, e.g. 'volume...' appears on the screen
(only if text is ON). See example screen. The length of the bar scale indicates the current memorized setting for this source. The bar scale
changes as the + or - buttons of the control are pressed.
The picture controls can only be adjusted with the RCU.
Volume Control
Volume control adjusts the volume.
Use the + button for a higher volume.
Use the - button for a lower volume.
Bass Control
Bass control adjusts the bass level (low tones).
Use the + button for more low tones.
Use the - button for less low tones.
Treble Control
Treble control adjusts the treble level (high tones).
Use the + button for more high tones.
Use the - button for less hight tones.
Balance Control
Is only effective if a external amplifier with loudspeakers is connected to the audio output.
The balance control adjust the sound level between the left and the right box.
Use the + button for a higher sound level on the right box than on the left one.
Use the - button for a higher sound level on the left box than on the right one.
The Pause key.
When the Pause key is pressed, the image projection is stopped, a blue screen will be displayed and the projector remains with full power
for immediate restart. The sound is not interrupted.
The display on front of the projector will show a "P".
To restart the image :
1 press pause key,
2 press exit key or
3 select a source number.