Filter
Top Products
Service Mode
11-3
5976069 BARCOREALITY 6400 21082000
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Change Password
This item is password protected when the password strap is installed.
How to enable or disable the password function ?
The password function is enabled when the password strap on the
controller module is installed. Consult an authorised Barco service
technician to change the strap position.
How to change the password ?
1 Push the cursor key é or ê to highlight 'Change password'.
2 Press ENTER to display the Change Password menu.
4 '_' characters are displayed. A new pasword can be
entered with the digit keys of the RCU or local keypad.
Everytime a digit is entered, a 'X' appears on the screen. The
confirm new pasword is still grayed out.
3 Press ENTER, the confirm new password item becomes
active.
Press EXIT if no changes have to be made.
4 4 'x' characters are displayed in the confirm new password
area. Key in your password again with the digit keys of the
RCU or local keypad.
5 Press ENTER.
If the confirm new password entery is the same as the
entered new pasword, the pasword is changed.
Change Language
To change the language of the control software:
1 Push the cursor key é or ê to highlight 'Change Language'.
2 Press ENTER to display the Change Language menu.
3 Push the cursor key é or ê to highlight the desired language.
4 Press ENTER to change the language.
Available languages : English
Change Projector Address
Projector Address
Every projector requires an individual address between 0 and 255.
This address can be software installed.
To change that address:
1 Push the cursor key é or ê to highlight 'Change Projector
Address''.
2 Press ENTER to display the Change Projector Address
menu. The actual address will be filled in.
3 Push the cursor key é or ê to highlight 'Projector Address''.
The actual address will be filled in. The first digit is highlighted.
Enter the new projector address with :
- the digit keys on the RCU or the local keypad or
- push the cursor key ç or è to select a digit and change
the value by pushing the cursor key é or ê until the new
value is reached. Continue with the other digits on the same
way.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
CHANGE PASSWORD
Enter new password
xxxx
Confirm new password
xxxx
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
DIMMING
MORE ...
CHANGE PROJ. ADDRESS
Projector address 001
Common address 0
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
Select with or
then <ENTER>
<EXIT> to return.
CHANGE LANGUAGE
English