Filter
Top Products
Connections
3-6 5975597 BARCODATA 808S 110397
PERIPHERAL EQUIPMENT
Connecting a RCVDS 05 switcher to the
BARCODATA 808S
- Up to 20 inputs with the RCVDS 05 switcher and up to 90 inputs
when 10 RCVDS switchers are linked via the expansion modules.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the
BARCODATA 808S (source selection and analog settings)
- The selected source number will be displayed on a 2 digit display
and the selected input modules will be indicated with a LED on the
rear.
For more information about the use of the RCVDS 05, consult the
Owner's Manual of the RCVDS 05.
Order number : RCVDS05 : R5975765
Connecting a VS05 switcher to the BARCODATA
808S.
The VS05 can switch up to 5 Composite Video sources, 3 S-Video
Sources and 1 RGB analog or component Video source to the
BARCODATA 808S. In addition, an audio signal associated with the
source, can be switched to an audio amplifier.
Order number : R9827890.
For more information about the use of the VS05, consult the VS05
Owner's Manual, order number : R5975245.
Connecting an IR Remote Receiver to the
BARCODATA 808S
This infra-red receiver unit makes it possible to control the
BARCODATA 808S from another room. There is a communication
line cable between the IR receiver and the projector or the RCVDS
800. The infrared control information from the Remote Control Unit
is sent to the IR Remote Receiver. The IR Remote Receiver 800
displays the selected source on a 7-segment display.
Order number : R9827515.