Filter
Top Products
Random Access Adjustment Mode
6-16 5975597 BARCODATA 808S 110397
Select with or
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Convergence Adjustment
Convergence adjustments affect both the horizontal and vertical lines
of the setup pattern. These adjustments are performed on the red
image while superimposed on the green image and then on the blue
image while superimposed on the green image.
Note : the green convergence adjustments can be added as an option.
When these are available, always start with 'green only'. This option
will also be indicated on the convergence menu.
Highlight first 'Green only' when available with the control disk and
press
ENTER to display the convergence adjustment menu.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return.
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
CONVERGENCE
SEL : select area
using
arrow keys
ADJ : adjust area
using
arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
25
23 9 15 17
24
22 8 14 16
5
4123
20 18 6 10 12
21
19 7 11 13
CONVERGE
ADJUSTMENT
70
red image
green image
The screen area is divided into 25 areas. Use the control disk to move
the box to the desired zone and then press
ENTER to begin the
convergence adjustment. Start the convergence adjustment with
zone one and continue as mentioned in the diagram hereafter.
Use the control disk to make horizontal or vertical convergence
adjustments in the selected zone and then press
ENTER to move the
box to another zone or
EXIT to return to the Convergence menu.
ENTER toggles the control disk between zone selection and zone
adjustment.
EXIT returns to convergence menu.