Filter
Top Products
6. Setup
For a point to point installation the projector’s IP address must be entered manually.
Check the operating system on the for the IP address, or contact your IT administrator.
How to add a projector group to the projector group list ?
1. Click on the white arrow
A menu is displayed, image 6-24
2. Click on the + sign of the projector group list
A dialog box is displayed
Image 6-26
3. Fill in the group name
4. Click OK to confirm or Cancel
The group is now added to the list of groups
How to add projectors to a group ?
1. Click on the projector to be added in the projector list
2. Drag the projector down to the projector group.
The projector is added to the group.
Adding a projector to agroup can also be done by using the “Copy + Paste” method on the right mouse button
menu.
How to connect to a projector or group of projectors ?
1. Double click on the projector or group of projectors
A green dot appears, indicating that the projector is present on the network and working properly
Image 6-27
connected and active projector
A connected and active projector
The name of the projector or group is now displayed in the upper part of the screen and indicates that the communication has
been set
Image 6-28
A connected and active projector
R5976992 ICON H250/400 13/12/2006
45