Barco R9010500 Projector User Manual


 
7. Advanced
7.7.2 Load file
When to load a file ?
In some cases the user wants a particular file to be used for the display of a particular source. In this case the user should load the
desired file from the image files menu. The load file option will allow the user to choose between several files corresponding more
or less to the active source specifications.
In normal operation the file selection (load) will be done automatically by AutoImage.
Howtoloadafile?
1. Press MENU to activate the Tool bar
2. Press to select the Image files item
3. Press to Pull down the Image files menu
4. Use or to select Load
Image 7-58
5. Press ENTER
A dialog box is displayed
Image 7-59
6. Use or to select the desired file
Tip: For more informa tion (specifications) on the image files see the Appendix s ection
7. Press ENTER
The file is loaded and the image is adapted.
The list of files which may be loaded will be of the data type if the active window is a data window, or they will
be of the video type if the active window is a video window.
R5976992 ICON H250/400 13/12/2006 83