Barco R9010500 Projector User Manual


 
7. Advanced
7.5.7 Manual gain control
What can be done ?
Beside the AGC there is the possibility to manually set the gain of the incoming video signal. When the AGC is enabled (ON), the
manual setting does not affect the gain, AGC must therefore be disabled. The manual gain control must be done on an external
pattern with white areas (grey scale bar pattern)
How to set the Manual Gain Control ?
1. Press MENU to activate the Tool bar
2. Press to select the Image item
3. Press to Pull down the Image menu
4. Use or to select Manual Gain Control
Image 7-43
5. Press ENTER
A scroll bar is displayed
Image 7-44
6. Use or , the numeric keys on the remote, or the keypad to change the gain so as to obtain homogeneous white parts in the
image.
7.6 Lamp management
Overview
Runtimes
Lamp mode
History
Reset lamp Runtime
Clear lamp error
Lamp runtime warning
7.6.1 Runtimes
How to display the runtimes ?
1. Press MENU to activate the Tool bar
2. Press to select the Lamp item
3. Press to Pull down the Lamp menu
4. Use or to select Runtimes
76
R5976992 ICON H250/400 13/12/2006