Filter
Top Products
9. Service Mode
To slave 1
Master Projector
Comm port
Comm 800 splitter
To slave 2
To slave 3
To next Comm 800 splitter
"To Switcher"
To slave 4
Comm 800 splitter
To slave 5
To slave 6
To slave 7 or to
next Comm 800 splitte
r
"To Switcher"
Image 9-8
Principal diagram: Linked via Comm port
For more information about the use of the Comm 800 splitter, consult the Comm 800 splitter documentation (R5976819).
Which information is available
serial number
unique serial number of the lamp
type
lamp type
run time total time the lamp is used in this or other projectors.
remaining run time
time left before the lamp must be replaced Using the la
mp longer than the maximum run time may
damage the projector.
number of strikes
Total times the lamp is started up.
Z-AXIS indication to adjust the Z-AXIS of the lamp (see Re-adj
ustment of the lamp position in chapter
Installation Guidelines).
How to
display the lamp menu
1. Push the cursor key ↑ or ↓ to highlight Lamp.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select w
ith ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-26
2. Press ENTER to select.
R5976654 SLM R12+ 27/01/2005
121