Filter
Top Products
3. Installation Guidelines
3.5.1 Access to the Lamp Unit.
What has to be done
To access the lamp casing, a side panel has to be removed.
Necessary tools
A flatblade screwdriver of 5 mm
Removingthesidepanel
1. Turn with a screwdriver the side panel lock screw (A) a quarter turn counter clockwise.
A
Image 3-7
Unlocking the side cover
2. Pull the right side of the panel towards you and next to the right
to remove.
A
B
Image 3-8
Lamp cover removal
3.5.2 Installation of the new Lamp Unit.
What has to be done
First remove the lock nut on
each spacer screw and next slide the lamp unit into the projector frame.
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
R5976654 SLM R12+ 27/01/2005
17