Filter
Top Products
B. Built-In Dust Filters
Image B-2
Input box slide out
5. Slide out the input box a little.
6. Loosen the screw on the front side.
Image B-3
Front screw top cover removal
7. Remove the back cover, see "Dust filt
er on the back side", page 139.
8. Turn out the screw on the top and the right side.
9. Take off the top cover.
10.Turn out the 4 screws holding the dust filter.
Image B-4
Dust filter removal
11.Take out the dust filter on the inside of the cover.
138
R5976654 SLM R12+ 27/01/2005