Filter
Top Products
DS72 Host Module
29
Selection 1), the Host Module responds:
Select the probe port to enable or disable the SNMP change trap, the Host Module responds with the
change.
Select 2), from the Environmental Sensor Configuration Menu allows the administrator to identify the probe
type, the Host Module responds
Select 2), from the probe type menu allows the administrator to set the High and Low Temperature
range. Option 2 and 4 will enable/disable their corresponding SNMP traps.
Select 3), from the probe type menu allows the administrator to set the High and Low Humidity range.
Option 2 and 4 will enable/disable their corresponding SNMP traps.
Sel Type Name Hi/En Lo/En St/En
1 Contact External Sensor1 N/A N/A Ds
2 Contact External Sensor2 N/A N/A Ds
Enter Request :1
Selected State Change Trap is..... Disabled
Enable ? (Y/N), CR for no change) :y
Sel Type Name Hi/En Lo/En St/En
1 Contact External Sensor1 N/A N/A En
2 Contact External Sensor2 N/A N/A Ds
Enter Request :
For configuration of all sensors of selected type in system with a
single user-supplied value.
1...Contact
2...Temperature
3...Humidity
4...Air Flow
Enter Request :1
Selected State Change Trap is..... NP
Enable ? (Y/N), CR for no change) :
Enter Request :2
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Temperature
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :