Filter
Top Products
5
Hardware Installation
CONSOLE
Keyboard,
mouse and
monitor
Bank 0 (Master)
Bank 1 (slave)
Bank 2 (slave)
Bank 3 (slave)
1234
5678
9101112
13 14 15 16
The OmniView
™
PRO has the capability to be daisy-chained to 3 more units (for a total of 4),
giving the user control over a maximum of 16 computers!
Each OmniView
™
PRO unit is defined as a BANK. See diagram above for more information.
BANK numbers range from 0 to 3, for a total of 3 BANKs. BANK 0 is the MASTER bank, while
banks 1 through 3 are slave banks. The MASTER bank is the unit that connects to the console
keyboard, mouse, and monitor.
The DIP switches must be set correctly for proper identification and usage. See the next
section for the actual settings. If you are using the OmniView
™
PRO in a single-unit
configuration, it must be set as the MASTER (BANK 0). If it is to be used as a slave unit,
then it must be set to any unused unique bank number from 1 through 3.
En
P72895_F1D104-OSD-univ_man.qxd 7/16/01 3:24 PM Page 5