Filter
Top Products
Installation
10
Step 3
Connect the PS/2 or USB mouse cable to the mouse port on the back of the
PRO3 KVM Switch in the “Console” section. (Refer to diagram below.)
Step 4
Attach the power adapter to the DC power jack labeled “12VDC, 1A” located on
the rear panel of the PRO3 KVM Switch. Only use the power adapter supplied
with the unit. (Refer to diagram below.)
(US power
adapter shown)
Your PRO3 KVM Switch is now installed and you are ready to connect
your servers.
1
2
3
4
5
6
7
8
section