Belkin F1DP116SEA Server User Manual


 
18
Network Settings
You can configure the network IP settings via VT-100 or web interface. This section
describes configuration through the web interface.
IP Configuration
The Console Server requires a valid IP address to operate within the user’s network
environment. If the IP address is not readily available, contact the system administrator to
obtain a valid IP address for the Console Server.
There are two types of IP assignments you can choose from:
• StaticIP
• DHCP(DynamicHostCongurationProtocol)
The unit ships with DHCP set to default. If no DHCP server is found on your network, the
Console Server will boot with the following static IP address: 192.168.2.156.
The new IP configuration setting can be saved by clicking “Save & Reboot”.