Belkin F1DP116SEA Server User Manual


  Open as PDF
of 68
 
43
section
System Administration
Firmware Upgrade
Firmware can be easily upgraded via a web page. This section describes the upgrade
procedures.
The latest firmware version is available from www.belkin.com/support.
UpgradefromtheWebInterface
Refer to web page “System > Firmware Upgrade”.
Click “Browse” to search the firmware file from the explorer window. Navigate through your
PC and select the firmware file. Click “Open” to confirm your selection.
Once the appropriate firmware file is selected, click “Upgrade” to initiate the firmware-
upgrade process. The web interface will display the progress bar to indicate the progress of
the file transfer. At the same time, the port LED on the front panel will also blink in series to
indicate the upgrade procedure is in process.
Note:
• TheConsoleServerprovidesRTC(Real-TimeClock)functionpoweredbyalithium
battery (CR2032, 3V). So the date/time will be maintained even if the unit encounters
a power loss.
• Ifyourepeatedlylosethedate/timeinformation,pleasereplace
the battery.
• Replacethe3-voltCR2032batteryonlywiththesameorequivalenttype
recommended by the battery manufacturer. A new battery can explode if it is
incorrectly installed. Discard used batteries according to the battery manufacturer’s
instructions.
 previous next