Belkin F1DP116SEA Server User Manual


  Open as PDF
of 68
 
39
section
System Administration
User Administration
At start-up, the system will prompt the user to enter the password to access the system.
The administrator can add or remove a user easily via the web pages.
There are two levels of access privileges:
An “Access Deny” page will display if the user is not authorized to access the web page.
AddUser
To add a user:
• Checktheusersonthe“Useradministration”screen.
• Clickthe“Add”button.
• Typethenewusernameandpassword.
UserNameandPasswordGuidelines
• Therstcharacteroftheusernamemustbeanalphabetletter.
• Thepasswordshouldbeatleastthreecharacterslong.
• Theusernameorpasswordmustnotbelongerthan32characters.
• Onlyan“admin”usercanaccessthe“Network”and“Systemadministration”.
UserName DefaultPassword AccessPrivileges
admin admin Full access
(user define) (user define) Only can access “Serial Port”
and “System Status”
 previous next