Belkin F5D7231-4 Network Router User Manual


 
12
Knowing Your Router
Knowing Your Router
13
section
2
1
3
4
5
6
7
8
9
10
11
12
6. Power Jack - GRAY
Connect the included 5V DC power supply to this jack.
7. Connections to Computers (LAN Ports) - BLUE
Connect your wired (non-wireless) computers to these ports.
These ports are RJ45, 10/100 auto-negotiation, auto-uplinking
ports for standard UTP category 5 or 6 Ethernet cable. The ports
are labeled 1 through 4. These ports correspond to the numbered
LEDs on the front of the Router.
8. Connection to Modem (WAN Port) - GREEN
This port is for connection to your cable or DSL modem. Use the
cable that was provided with the modem to connect the modem
to this port. Use of a cable other than the cable supplied with the
cable modem may not work properly.
9. Reset Button
The Reset button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router’s
normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the Reset
button. Use the restore option in instances where you may have
forgotten your custom password.
(6) (7) (8) (9)