Filter
Top Products
Connecting and Configuring the Adapter
10
3. Push and hold the “Auto Connect”
button found on the back of the
Adapter for 10 seconds to connect to
the network with the strongest wireless
signal within the area. When the
Adapter has connected to the router
or access point, the “Searching” light
(red) will not be lit.
Note: If the Adapter does not
connect to your desired network,
you will need to position the Adapter
closer to your router and push the
“Auto Connect” button. The Adapter
will then save your network’s
information (even after powering off)
and can then be repositioned next to
your gaming console.
Installation is now complete.
B. Connecting to a hidden or secured network
1. Insert the Installation Software CD into
your computer.
2. Connect one end of the Ethernet cable
(included) into the Ethernet port on the
Adapter. Then, connect the other end
to your PC.