Filter
Top Products
Changing System Settings
section
2
1
3
4
5
6
7
37
4. You will be asked if you are sure you want to continue. Click “OK”.
5. You will see one more message. This message tells you that the
Adapter may not respond for as long as one minute as the firmware
is loaded and the Adapter is rebooted. Click “OK”.
A 30-second countdown will appear on the screen. When the
countdown reaches zero, the Adapter firmware update will be
complete. The Adapter home page should appear automatically. If
not, type in the Adapter’s address (default = 192.168.2.254) into the
navigation bar of your browser.