Filter
Top Products
13
The most convenient way to access the Adapter’s Web-Based Advanced
User Interface is to connect the unit to the wireless router through
the included cable. Once you finish configuring the device, you can
disconnect the cable.
If you wish to connect a computer directly to the Adapter to configure
it, you must set your client to match the settings of the Adapter before
you can access the Web-Based Advanced User Interface. Perform the
following steps from the computer from which you wish to configure
your Adapter.
Note: You must undo these steps once you have completed configuring
your Adapter.
Using the Web-Based Advanced User Interface
section
2
1
3
4
5
6
7