Filter
Top Products
Using the Web-Based Advanced User Interface
14
Windows
®
98SE, Me, 2000, and XP
1. Go to the Windows Control Panel and double-click on the “Network”
icon or the “Network Connections” icon.
2. Right-click on the “Local Area Connection” for your wireless adapter
and select “Properties”.
3. In the “General” tab, select the Internet Protocol TCP/IP settings for
your wireless adapter and click on the “Properties” button.
4. Select the “Use the following IP address” radio button.
5. Enter an IP address in the same subnet as the Adapter. For example:
192.168.2.200.
6. Enter the following subnet mask: 255.255.255.0. Then click “OK”.
Note: Once you have completed configuring your Adapter, repeat
steps 1 through 3. Then select “Obtain an IP automatically” or set a
valid IP for your computer on the same subnet as the network to which
you are connecting.