Filter
Top Products
Using the Web-Based Advanced User Interface
24
WEP Setup
64-Bit WEP Encryption
1. Select “64-bit WEP” from the drop-down menu.
2. Select either “Open System”, “Shared Key”, or “Auto” from the
“Authentication Mode” drop-down box.
3. After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually, or you can type in a passphrase
in the “Passphrase” field and click “Generate” to create a key. A hex
(hexadecimal) key is a combination of numbers and letters from A–F
and 0–9. For 64-bit WEP, you need to enter 10 hex characters.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
4. Click “Apply Changes” to finish. Encryption in the router is now set.
Each of your computers on your wireless network will now need to be
configured with the same security settings.
WARNING: If you are configuring the wireless router (or access point) from
a computer with a wireless client, you will need to ensure that security
is turned ON for this wireless client. If this is not done, you will lose your
wireless connection.