Filter
Top Products
2322
Configuring your Router with the Setup Wizard
Configuring your Router with the Setup Wizard
23
section
2
1
3
4
5
6
7
8
9
10
11
12
5. Next, select your connection type (this information is provided
by your ISP) and click “Next”. For a list of common ISP settings
turn to page 83
6. Now enter the required values provided by your ISP. For the
“PPPoE” or “PPPoA” page you will see the following screen.
Enter the required values provided by your ISP and click “Next”.
Note: For more detailed instruction on other connection types,
please refer to the “Manually Configuring your Router” section of
this User Manual.
7. The Router is shipped with default to Annex A specification,
which is implemented by ISPs in most countries. You can click
“Next” to proceed to the next step.
If you are in a country/region where ISPs use Annex B
specification, such as Germany, select Annex B and “Next”.
Check with your ISP if you are not sure.