Filter
Top Products
76
Knowing your Router
Knowing your Router
7
section
2
1
3
4
5
6
7
8
9
10
11
12
Back Panel
6. Ethernet Ports
The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports
are labeled 1 through 4. These ports correspond to the numbered
LEDs on the front of the Router. Connect your network-enabled
computers or any networking devices to one of these ports.
7. Reset Button
The “Reset” button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router’s
normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the Reset
button. Use the restore option in instances where you may have
forgotten your custom password.
a. Resetting the Router
Push and hold the Reset button for one second then release
it. When the Power/Ready light becomes solid again, the
reset is complete.
b. Restoring the Factory Defaults
Press and hold the Reset button for six seconds then
release it. When the Power/Ready light becomes solid again,
the restore is complete.
8. DSL Line
This port is for connection to your ADSL line. Connect your ADSL
line to this port.
9. Power Plug
Connect the included 12V DC power supply to this inlet. Using
the wrong type of power adapter may cause damage to
your Router.
(7) (8) (9)
(6)