Filter
Top Products
3534
Manually Configuring your Router
Manually Configuring your Router
35
Manually Configuring your Router
section
2
1
3
4
5
6
7
8
9
10
11
12
Setting your ISP Connection to Static IP (IPoA)
This connection type is also called “Classical IP over ATM” or “CLIP”,
which your ISP provides a fixed IP for your Router to connect to
the Internet.
1. IP Address – Enter an IP address assigned by your ISP for the
Router WAN interface.
2. Subnet Mask - Enter a subnet mask assigned by your ISP.
3. Default Route - Enter a default gateway IP address. If the Router
cannot find the destination address within its local network, it will
forward the packets to the default gateway assigned by your ISP.
4. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. These identifiers are assigned by
your ISP.
5. Encapsulation - Select LLC or VC MUX your ISP uses.
(1)
(2)
(3)
(4)
(5)