Filter
Top Products
4140
Manually Configuring your Router
41
Manually Configuring your Router
Setting WPA-PSK (no server)
1.
From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)”.
2. Enter your pre-shared key. This can be from eight to 40
characters and can be letters, numbers, or symbols. This same
key must be used on all of the clients that you set up.
3. Click “Apply Changes” to finish. You must now set all clients to
match these settings.
Setting WPA (with server) Settings
If your network uses a radius server to distribute keys to the clients,
use this setting.
1. From the “Security Mode” drop-down menu, select “WPA
(with server)”.
2. Enter the IP address of the radius server into the “Radius
Server” fields.
3. Enter the radius key into the “Radius Key” field.
4. Enter the key interval. Key interval is how often the keys are
distributed (in packets).
5. Click “Apply Changes” to finish. You must now set all clients to
match these settings.