Filter
Top Products
Chapter 5 Installing Additional Memory
27
2. Remove cover 2 (see Chapter 3, "Removing and Replacing Covers").
3. Remove the four screws holding the System board assembly secure on top.
Remove the system board assembly by raising the retaining latches to
disengage it from the socket, then pull it out until it clears the chassis
guides (see Figure 5-5). Set the system board assembly down on a work
surface, metal plate side down.
Figure 5-5. Removing System Board from LH 4r
4. Loosen the memory cage screw, and remove the cover by sliding it slightly
up to unlock it.
5. Unseat each memory board with the release clips, and remove the two
boards (see Figure 5-6).