Filter
Top Products
Chapter 1 Introduction
2
CAUTION It is critical to disassemble and rebox all electronic
components before reshipment. Electronic components
(especially hard disk drives) can sustain damage when
shipped in rack enclosures.
HP NetServer LH 4 Installation Procedures
Refer to the HP NetServer LH 4 Installation Road Map for step-by-step
installation instructions.
If you are installing any accessories, refer to the documentation shipped with the
accessory package.
HP NetServer LH 4r Installation Procedures
Refer to the HP NetServer LH 4r Installation Road Map, for step-by-step
installation instructions.
NOTE The HP NetServer LH 4r Installation Road Map does not
include procedures for installing the system in a rack. Refer to
Chapter 8, "Mounting the HP NetServer LH 4r in a Rack," for
detailed rack installation instructions.
If you are installing any accessories, refer to the documentation shipped with the
accessory package.
You should also review:
• All documentation that comes with your rack, such as the Rack
Installation Road Map.
• The Rack Cabling Reference for the HP NetServer LH 4r.
• The user guide for your mass storage units: for example, the HP Rack
Storage/8 System Installation Guide.
HP NetServer LH 4 to LH 4r Conversion Kit
The HP NetServer LH 4 is a stand-alone pedestal model. If you want to install the
LH 4 in a rack, contact your reseller for information about the HP NetServer LH
4 to LH 4r Conversion Kit. This kit contains all components needed to convert
your HP NetServer LH 4 into a rack-optimized HP NetServer LH 4r.