Filter
Top Products
Chapter 10 Configuring the NetServer
63
10 Configuring the NetServer
The HP NetServer Navigator CD-ROM is shipped with your NetServer. You will
use this CD-ROM to configure your NetServer.
Contents of the NetServer Navigator CD-ROM
The Main Menu of HP Navigator directs you to modules where you can perform
configuration tasks or access online system documentation. The menu buttons for
these modules are as follows:
• Readme File
• Configuration Assistant and Installation Assistant
• HP Management Solutions
• NetServer Utilities
• User Preferences
Before the HP Navigator Main Menu is displayed, you may be prompted to set
the language and the time and date. You can also set the language that the BIOS
displays.
The following is a description of the contents of the HP NetServer Navigator
CD-ROM, as accessed from the Main Menu.
Obtaining NetServer Product History
When the NetServer is connected to its monitor, keyboard, and power supply, you
are ready to begin installation and configuration. As you configure the NetServer
for use, it is important to have the very latest configuration information. This will
inform you of any applicable compatibility issues, and provide you an up-to-date
list of HP-tested peripherals and accessories. Refer to the "Tested Products List"
on the HP NetServer Navigator CD-ROM.
You should also be familiar with HP DiagTools (on the HP NetServer Navigator
CD-ROM) and Information Assistant (on the HP NetServer Online
Documentation CD-ROM) to help you configure the NetServer.
Follow the instructions in your HP NetServer LH 4 (or LH 4r) Installation Road
Map to complete these steps.