Filter
Top Products
Operation 37
Freezing the image
Freezing the imageFreezing the image
Freezing the image
Press FREEZE
FREEZEFREEZE
FREEZE on the remote control to freeze the
image. The word “FREEZE
FREEZEFREEZE
FREEZE” will display in the upper
left corner of the screen. To release the function, press
any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures
are running on the video or other device. If the
connected devices have active audio output, you will
still hear the audio even though the image is frozen
onscreen.
Hiding the image
Hiding the imageHiding the image
Hiding the image
In order to draw the audience's full attention to the
presenter, you can use BLANK
BLANKBLANK
BLANK on the projector or
remote control to hide the screen image. The word
“BLANK
BLANKBLANK
BLANK” appears in the corner of the screen while the
image is hidden. When this function is activated with an
audio input connected, the audio can still be heard.
You can set the blank time in the
SYSTEM SETUP:
SYSTEM SETUP: SYSTEM SETUP:
SYSTEM SETUP:
Basic
BasicBasic
Basic >
> >
> Blank Timer
Blank TimerBlank Timer
Blank Timer
menu to let the projector return
the image automatically after a period of time when
there is no action taken on the blank screen. The length
of time can be set from 5 to 30 minutes in 5-minute
increments.
If the preset time spans are not suitable for your
personation, select Disable
DisableDisable
Disable.
No matter
Blank Timer
Blank TimerBlank Timer
Blank Timer is activated or not, you can press
most of the keys on the projector or remote control to
restore the picture.
Utilizing FAQ function
Utilizing FAQ functionUtilizing FAQ function
Utilizing FAQ function
The INFORMATION
INFORMATIONINFORMATION
INFORMATION menu contains possible solutions to problems regarding image
quality, installation, special feature operation and service information.
To get the FAQ information:
1. Press / on the projector or remote control
or press MENU/EXIT
MENU/EXITMENU/EXIT
MENU/EXIT to open the OSD menu
and press / to highlight the
INFORMATION
INFORMATIONINFORMATION
INFORMATION menu.
2. Press to select FAQ-Image and Installation
FAQ-Image and InstallationFAQ-Image and Installation
FAQ-Image and Installation or
FAQ-Features and Service
FAQ-Features and ServiceFAQ-Features and Service
FAQ-Features and Service.
3. Press MODE/ENTER
MODE/ENTERMODE/ENTER
MODE/ENTER.
4. Press / to select a problem and press
MODE/ENTER
MODE/ENTERMODE/ENTER
MODE/ENTER for possible solutions.
5. To exit the OSD menu, press MENU/EXIT
MENU/EXITMENU/EXIT
MENU/EXIT.
Do not block the projection
lens from projecting as this
could cause the blocking
object to become heated and
deformed or even cause a fire
.