Filter
Top Products
Operation 51
Function
(default setting / value)
Description
Lan Control
Settings
Control By
Control ByControl By
Control By
(RS232)
DHCP
DHCPDHCP
DHCP
(On)
Projector IP Address
Projector IP AddressProjector IP Address
Projector IP Address
Subnet Mask
Subnet MaskSubnet Mask
Subnet Mask
Default Gateway
Default GatewayDefault Gateway
Default Gateway
DNS Server
DNS ServerDNS Server
DNS Server
Apply
ApplyApply
Apply
See "Controlling the projector through a Lan environment" on page 40
for details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Color Space Conversion, Language, Projector
Position, High Altitude Mode, Security Settings and Baud Rate.
FAQ-Image
and
Installation
Displays possible solutions to problems you may encounter.
FAQ-
Features and
Service
Current
System
Status
Source
SourceSource
Source
Shows the current signal source.
Picture Mode
Picture ModePicture Mode
Picture Mode
Shows the selected mode in the PICTURE
PICTUREPICTURE
PICTURE menu.
Resolution
ResolutionResolution
Resolution
Shows the native resolution of the input signal.
Color System
Color SystemColor System
Color System
Shows input system format: NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Equivalent Lamp HourEquivalent Lamp Hour
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Firmware VersionFirmware Version
Firmware Version
Shows the firmware version of your projector.
5. SYSTEM SETUP: Advanced menu
6. INFORMATION menu