Filter
Top Products
Introduction10
Controls and functions
Projector
7. TEMPerature warning light
Lights up red if the projector's
temperature becomes too high.
"Indicators" on page 60
8. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
"Indicators" on page 60
9. AUTO
Automatically determines the best picture
timings for the displayed image.
"Auto-adjusting the image" on page 25
10. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection.
"Correcting keystone" on page 29
11. Right/
Activates panel key lock.
When the On-Screen Display (OSD)
menu is activated, the #5, #10, and #11
keys are used as directional arrows to
select the desired menu items and to make
adjustments.
"Locking control keys" on page 39, "Using
the menus" on page 26
12. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
"Selecting a picture mode" on page 33
13. SOURCE
Displays the source selection bar.
"Switching input signal" on page 30
1. Focus ring
Adjusts the focus of the projected image.
"Fine-tuning the image clarity" on page 25
2. POWER indicator light
Lights up or flashes when the projector is
under operation.
"Indicators" on page 60
3. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
"Using the menus" on page 26
4. Power
Toggles the projector between standby
mode and on.
"Starting up the projector" on page 24,
"Shutting down the projector" on page 44
5. Left/
Starts the FAQ function.
"Utilizing FAQ function" on page 39
6. BLANK
Used to hide the screen picture.
"Hiding the image" on page 38
1
4
10
9
11
13
12
5
8
7
2
3
6
10
For details, see the info. provided behind the
hand sign .