Filter
Top Products
Operation 37
4. Press to highlight Timer Position and set the timer position by pressing /
.
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing / .
6. Press to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing / . If you select On, a double beep sound will be heard at the
last 30 seconds of counting down/up, and a triple beep sound will be produced when
the timer is up.
7. To activate the presentation timer, press and press / to highlight On and press
MODE/ENTER.
8. A confirmation message is displayed. Highlight Ye s and press MODE/ENTER on the
projector or remote control to confirm. You will see the message “Timer is On”
appearing on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
• Using the remote control
Press Timer On and press / to highlight Off and press MODE/ENTER.
• Using the OSD menu
1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and highlight Off. Press
MODE/ENTER. A confirmation message is displayed.
2. Highlight Ye s and press MODE/ENTER to confirm. You will see the message “Timer is
Off” appearing on the screen.
How to use the Timer On key?
Timer On is a multi-functional key.
• If the presentation timer is off, pressing this key
displays a confirmation message. You can decide
whether to activate the timer or not by following the
on-screen instruction.
• If the timer is already on, pressing this key displays a
confirmation message. You can decide whether to
restart, continue or turn off the timer by following
the on-screen instruction.
Top-Left Bottom-Left Top-Right Bottom-Right
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decreases from the preset time to 0.