Filter
Top Products
Operation 51
Function Description
Quick
Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a normal
90-second duration to approximately 30 seconds.
High
Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 40 for details.
Audio
Settings
Mute
Volume
Power On/Off Ring Tone
See "Adjusting the sound" on page 40 for details.
Standby
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER jack is correctly
connected to devices. See "Connecting a monitor" on page 20 for how to
make the connection.
Enabling this function slightly increases the standby power
consumption.
Lamp
Settings
Lamp Mode
See "Setting Lamp Mode as Economic" on page 55 for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 59 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 55 for details on how the
total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before changing to a new
one. See "Utilizing the password function" on page 27 for details.
Power On Lock
See "Utilizing the password function" on page 27 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays the grid test
pattern. It helps you adjust the image size and focus and check that the
projected image is free from distortion.
5. SYSTEM SETUP: Advanced menu