Filter
Top Products
Operation32
2. Press to highlight Aspect Ratio.
3. Press / to select an aspect ratio to suit the format of the video signal and your
display requirements.
About the aspect ratio
• In the pictures below, the black portions are inactive areas and the white portions are
active areas.
• OSD menus can be displayed on those unused black areas.
1. Auto: Scales an image proportionally to fit
the projector's native resolution in its
horizontal or vertical width. This is
suitable for the incoming image which is
neither in 4:3 nor 16:9 and you want to
make most use of the screen without
altering the image's aspect ratio.
3. 4:3: Scales an image so that it is
displayed in the center of the
screen with a 4:3 aspect ratio.
This is most suitable for 4:3
images like some computer
monitors, standard definition TV
and 4:3 aspect DVD movies, as it
displays them without aspect
alteration.
2.
Real: The image is projected as its original
resolution, and resized to fit within the
display area. For input signals with lower
resolutions, the projected image will
display smaller than if resized to full
screen. You could adjust the zoom setting
or move the projector towards the screen
to increase the image size if necessary. You
may also need to refocus the projector after
making these adjustments.
4. 16:9: Scales an image so that it is
displayed in the center of the
screen with a 16:9 aspect ratio.
This is most suitable for images
which are already in a 16:9 aspect,
like high definition TV, as it
displays them without aspect
alteration.
16:10 picture
15:9 picture
4:3 picture
4:3 picture
16:9 picture
16:9 picture