Filter
Top Products
Installation
46 ETEP Installation Guide
You can perform a shutdown using a CLI command or ETEMS. The following procedure describes the
CLI command.
To shut down the ETEP from the CLI:
1 Log in as Administrator (user name admin) or Ops (user name ops).
2 At the command prompt, type shutdown. After the system shutdown is complete, the following
message is displayed on the terminal.
Power cycle required to reboot appliance
3 Unplug the power cable from the back of the unit or from the power outlet.
Example
In the following example the user logs in as admin and shuts down the ETEP.
pep login: admin
Password:
Last login: Tue Apr 8 15:12:21 2008 on ttyS0
Welcome admin it is Tue Apr 8 15:17:57 UTC 2008
admin> shutdown
Related topic:
● “shutdown” on page 148