Filter
Top Products
Black Box®LB1350A/LB1351A
24
6. Managing with a Terminal
The first option for managing the Black Box® LB1351A Traffic Aggregator is by using a
terminal emulation program. In order to do this you will need a PC (or a terminal) with a
terminal emulation program.
Connect the serial cable supplied with the Black Box® LB1351A between the device
(miniDIN side) and a serial port on the PC with the terminal emulation (on the DB9
side). Start the emulation program and reset the device (recommended).
After system initialization you will get to the device’s main menu.
The main menu
This menu contains a header with the software version, the model of the device
(LB1351A ) and the vendor Black Box.
Following is a two-option menu. See figure 6-1.
Selecting option 1 will invoke the device’s status menu, while option 2 will bring up the
device control menu.
************************************************************
**
* Software version: v1.0 *
* Version date: 16/10/02 *
* *
* Vendor: Black Box *
* Model: LB1351A *
* *
************************************************************
1 . Device status
2. Device control
Select (1-2):
figure 6-1 - main menu
The device status menu
This menu contains two options: 1 for basic status and 2 for advanced status. Figure 6-
2 shows the menu. Figures 6-3 and 6-4 show the basic and advanced status
respectively.
Device status
:
====== ========
1 . Basic status
2. Advanced status
0. Main menu
Select (0-2):
figure 6-2 - device status menu