Filter
Top Products
10 Introduction
Host/Printer Port 2
This port, labeled “SES2-AUX,” is designed to connect to a host connection
(computer or modem) or a serial printer, and can operate from 110 to 19,200 baud.
This port uses an RS-232-C interface via a DB25 female connector, and is configured
as a DCE (Data Communication Equipment) device. The pin assignments for this
port are shown below:
Host/Printer Port 2 Pin Assignments
Refer to the Installation chapter for details on the connection of all ports to serial
devices (hosts, modems, or printers).