Filter
Top Products
STEP 8 – Save Parameters 17
STEP 8 – Save Parameters
Finally, remember to save your Setup parameters in permanent memory, so that they
can be recovered if the terminal is powered down. When you exit the Setup menu,
the prompt “Save parameters before exit? (Y/N)” appears. To save parameters select
“Y”. Another way to save parameters is to move the highlight bar over the “Save
Parameters” field in the EXECute menu and press the “space” bar.
Remember to save your Setup settings after the entire installation process.
STEP 9 – Establish Communications
Your installation is now complete. By pressing the Return or Enter key, you should be
able to communicate with the host computer(s).
If for some reason, your installation was not successful, make sure your physical
connections are secure, that the communications protocol settings match your
devices, and that the Setup selections are chosen to provide a proper interface between
the terminal and your devices.
If you continue to have problems installing the terminal, call your local dealer for
technical support.