Filter
Top Products
_____________________________________________________________________________________________________
Printing Labels 45
The STX L command switches the Printer from the system level to the label
formatting command. All command characters after STX L are interpreted as
Label Formatting Commands until terminated with E,X, or s. All label
formatting commands are terminated with 0D HEX.
CC Description Format
: Set cut by amount (4 digits)
The cutter function will perform a cutting
action after the number of labels specified
:nnnn
nnnn = 4 digits of labels printed
before cut. Default = 0001
A Set format attribute
An n = 1 - XOR
2 - Transparent
3 - Opaque
5 - Inverse
C Set column offset amount
Cnnnn nnnn = Inches/100
c Set cut by amount (2 digits)
cnn nn = 2 cut amount
D Set height and width dot size
h = Horiz. dot size; can be 1 or 2
v = Vert. dot size; can be 1,2, or 3
(0.005" steps) Default is “D22”
E Terminate field generation and print label
G Place data in global register
H Enter heat setting
(The amount of heat applied per dot row can
be used to help control print quality)
Hnn nn = 2 digits. 1 - 30
10 is nominal and default
Print contrast is relative to speed
M Mirror text/bar code Second transmission restores print
m Set metric mode
P Print speed
Pa a = single char.
Enter maximum speed for print cycle, 1
character
C 2.0 ips
D 2.5 ips
E 3.0 ips
F 3.5 ips
G 4.0 ips
H 4.5 ips
I 5.0 ips
J 5.5 ips
K 6.0 ips
L 6.5 ips
M 7.0 ips
N 7.5 ips
O 8.0 ips
P 8.5 ips
Q 9.0 ips
R 9.5 ips
S 10.0 ips
p Set label backup speed
pa a = single char. (C - I)
Q Enter quantity of labels to print
Qnnnn nnnn = quantity
R Set row offset amount
Rnnnn nnnn = row offset
r Recall stored label format
rnn...n nn...n label name of up
to 16 char. terminated by CR
S Slew speed
Sa a = single character
Sets maximum speed for label feeding. 1
digit.
C 2.0 ips
D 2.5 ips
E 3.0 ips
F 3.5 ips
G 4.0 ips
H 4.5 ips
I 5.0 ips
J 5.5 ips
K 6.0 ips
L 6.5 ips
M 7.0 ips
N 7.5 ips
O 8.0 ips
P 8.5 ips
Q 9.0 ips
R 9.5 ips
S 10.0 ips
Table 4-4 Label Formatting Commands