BT 902 Network Card User Manual


 
12
10. How can I check that my Powerline Adapters are working
properly?
• Your Powerline Adapters are set to work together as a pair, and
should work perfectly out of the box. The best way to test them
is to nd a double plug socket, and plug them in next to each
other. Often the best place to nd a double plug socket is in your
kitchen. Alternatively plug them into a trailing extension strip
(but not an anti-surge strip).
• When plugged in, after 10-40 seconds, the Powerline Adapters
will congure themselves so that each has a green status light,
and one of the pair has an orange AP light.
• Both adapters have green status lights
• If the Powerline Adapters don’t congure themselves as above,
you need to follow the reset procedure.
• When your Powerline Adapters are connected to a device the
Ethernet light should light up. When you’re using the service
the Ethernet light will ash. You may notice that the Status Light
on one or both Powerline Adapters changes to red or orange.
This isn’t something to worry about if you are not having any
problems with your connection.
260072-021_PG902_User_Guide(UK_A12 12 2008/8/6 �� 10:44:50