Filter
Top Products
8
Step 3: On your AP adapter (Step 1),
press the CONFIG/RESET button until
the AP LED starts blinking.
Step 4: On the NEW EP adapter you
are adding to your network (step 2),
press the CONFIG/RESET button
until the AP LED starts ashing. The
NEW EP adapter AP LED will ash 3
times and the STATUS LED will turn
ON.
Wait until the AP LED on the AP
adapter (step 1) stops blinking.
You have now added your NEW EP adapter to your network.
Repeat the same steps for each new adapter you want to add to your
network.
AP/STBY
ETHERNET
STATUS
CONFIG
RESET
ON
STBY
Powerline Ethernet
Adapter with Filter
AP/STBY
ETHERNET
STATUS
CONFIG
RESET
ON
STBY
Powerline Ethernet
Adapter with Filter
260072-021_PG902_User_Guide(UK_A8 8 2008/8/6 �� 10:44:50