BT 902 Network Card User Manual


 
4
Functions
Button Action Result
CONFIG/
RESET
Press for one (1) second.
First time: LEDs
are turned OFF
Second time: LEDs
are turned ON
All LEDs will turn off, but the
Powerline will still be working.
Great if you are watching
movies in a dark room
Press for ve (5) seconds
Access Conguration
mode
See page 7 for more
information on how
to add extra Powerline
adapters to your network
Press for ten (10) seconds
Performs a Factory setting
This will return the adapter to
its original factory settings.
ON/STBY
Press once to set the
adapter to Standby Mode.
(Press it again to turn
the adapter back on.)
Status and Ethernet LEDs
are switched off and the
adapter stops working.
Ethernet Port:
Powerlines use an Ethernet port to connect
through an Ethernet cable to the device you
wish to add to your network. One end of the
Ethernet cable is connected to the Powerline
adapter, while the other end is connected to
your device.
Front and rear plugs
Comtrend Powerline adapters are the rst ones in the UK market to
bring a fully BS1363 certied female plug; so choosing a Comtrend
Powerline PG902 means you can still safely use your electrical outlet.
260072-021_PG902_User_Guide(UK_A4 4 2008/8/6 �� 10:44:48