Filter
Top Products
6
Shortly, you will see the Ethernet LED blinking; this indicates that there
is data trafc going through the PG902. You are now ready to start
using your network.
How to use a power strip with the PG902
If you are planning to use a power strip we recommend that you plug
the power strip in to the Powerline and not the Powerline into the power
strip. If you must plug your adapter into a power strip, we suggest you
use a basic power strip as the more advanced ones have a lter that
can interfere with the Powerline signal.
AP/ST B
Y
ETHE RNE
T
S
TAT
US
CONF IG
RESE
T
ON
STBY
Powerlin e Ethernet
Adapter wi th Filte r
AP/ST BY
ETHE RNET
STATUS
CONF IG
RESE T
ON
STBY
Powerlin e Etherne
t
Adapter wi th Filter
260072-021_PG902_User_Guide(UK_A6 6 2008/8/6 �� 10:44:49